MSI K8T Neo-V Bedienerhandbuch PDF herunterladen (Seite 67)

3-21

BIOS Setup

VT8237 SATA-IDE Controller

This setting is used to enable/disabled the VT8237 SATA-IDE controller.

Setting options: Disabled, Enabled.

V-Link Data 2X Support

This setting controls the onboard V-Link Data 2X Support. Setting options:

Enabled, Disabled.

Floopy Disk Controller

This is used to enable or disable the onboard Floppy controller.

Serial Port 1/2

These items specify the base I/O port addresses of the onboard Serial Port 1

(COM A)/Serial Port 2 (COM B). Selecting Auto allows AMIBIOS to auto-

matically determine the correct base I/O port address. Settings: Auto, 3F8/

COM1, 2F8/COM2, 3E8/COM3, 2E8/COM4 and Disabled.

Port2 Mode

This item sets the operation mode for Serial Port 2. Settings: Normal,

1.6 uS, 3/16 Baud and ASKIR (the last three operation modes are setting

options for IR function).

IR Pin Select

Set to IRRX/IRTX when using an internal IR module connected to the IR

header. Set to SINB/SOUTB. when connecting an IR adapter to COM B.

Parallel Port

This field specifies the base I/O port address of the onboard parallel port.

Selecting Auto allows AMIBIOS to automatically determine the correct base

I/O port address. Settings: Auto, 378, 278, Disabled.

Option Description

Auto BIOS will automatically determine whether to enable the

onboard Floppy controller or not.

Enabled Enables the onboard Floppy controller.

Disabled Disables the onboard Floppy controller.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 85 86

Keine Kommentare

MSI K8T Neo-V Bedienerhandbuch Seite 67