MSI MS-8801 Betriebsanweisung PDF herunterladen (Seite 52)

3-9

BIOS Setup

Settings: Enabled, Disabled.

CPU L1 & L2 Cache

The item allows you to turn on or off CPU’s internal (L1) and external (L2)

cache. Settings: Enabled and Disabled.

CPU L2 Cache ECC Checking

This setting allows you to enable or disable the ECC (Error-Correcting Code)

feature for error detection and correction when data passes through L2 cache

memory. Setting options: Enabled, Disabled.

Swap Floppy

Setting to Enabled will swap floppy drives A: and B:.

Seek Floppy

Setting to Enabled will make BIOS seek floppy drive A: before booting the

system. Settings: Disabled, Enabled.

Boot Up NumLock Status

This setting is to set the Num Lock status when the system is powered on.

Setting to On will turn on the Num Lock key when the system is powered on.

Setting to Off will allow users to use the arrow keys on the numeric keypad.

Setting options: On, Off.

Typematic Rate Setting

This item is used to enable or disable the typematic rate setting including

Typematic Rate & Typematic Delay.

Typematic Rate (Chars/Sec)

After Typematic Rate Setting is enabled, this item allows you to set the rate

(characters/second) at which the keys are accelerated. Settings: 6, 8, 10, 12,

15, 20, 24 and 30.

Typematic Delay (Msec)

This item allows you to select the delay between when the key was first pressed

and when the acceleration begins. Settings: 250, 500, 750 and 1000.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 82 83

Keine Kommentare

MSI MS-8801 Betriebsanweisung Seite 52