
Chapter 3
3-18
VIA-3058 AC97 Audio Auto allows the mainboard to detect whether
an audio device is used. If the device is
detected, the onboard VIA AC97 (Audio
Codec97) controller will be enabled; if not,
the controller is disabled. Disable the
controller if you want to use other controller
cards to connect an audio device. Settings
are Auto (default) and Disabled.
VIA-3068 MC97 Modem Auto allows the mainboard to detect whether
a modem is used. If a modem is detected,
the onboard VIA MC97 (Modem Codec97)
controller will be enabled; if not, the control-
ler is disabled. Disable the controller if you
want to use other controller cards to
connect modems. Settings are Auto
(default) and Disabled.
VIA-3043 OnChip LAN Enables or disables VIA chip integrated
LAN controller. Settings are Enalbed and
Disabled (default).
Init Display First
This item specifies which VGA card is your primary graphics adapter.
Available options are PCI Slot and AGP. Default value is PCI Slot.
OnChip USB Controller
The item specifies which USB (Universal Serial Bus) Port is enabled. The
settings are All Enabled, 1&2 USB Port, 2&3 USB Port, 1&3 USB Port, 1
USB Port, 2 USB Port, 3 USB Port or All Disabled. Default is All Enabled.
USB Keyboard Support
Set to Enabled if your system installs and uses an USB keyboard. Default is
Disabled.
IDE HDD Block Mode
This allows your hard disk controller to use the fast block mode to transfer
data to and from the hard disk drive. Block mode is also called block
transfer, multiple commands or multiple sector read/write. Setting to Ena-
Kommentare zu diesen Handbüchern