MSI MS-6382 Spezifikationen PDF herunterladen (Seite 50)

AWARD

BIOS Setup

3-19

If the ISA add-on card has Onboard FDC to be set at

FDC exist

None FDC exist

Disabled

Enabled (default)

bled makes IDE controller use block mode; Disabled makes the controller

use standard mode. Default is Enabled.

POWER ON Function

This controls which button on the PS/2 mouse or keyboard can power on

the sytem. Settings are BUTTON ONLY (default), Keyboard 98, Password,

Hot Key, Mouse Left and Mouse Right.

KB Power On Password

If POWER ON Function is set to Password, then you can set a password in

this field for the PS/2 keyboard to wake up the system from suspend mode.

Hot Key Power ON

If POWER ON Function is set to Hot Key, then you can specify a hot key

combination in the field for the PS/2 keyboard to wake up the system from

suspend mode. Settings are Ctrl-F1 through Ctrl-F12.

Onboard FDC Controller

This is to enable or disable the onboard Floppy controller. Set to Enabled if

you have a floppy disk drive installed on the mainboard. Default is Enabled.

Onboard Serial Port 1/2

These items specify the base I/O port address of the onboard Serial Port 1

(COM 1)/Serial Port 2 (COM 2). Setting to Auto allows BIOS to automatically

determine the correct base I/O port address. Available options are Auto,

3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 and Disabled. Default is Auto.

If you have ISA add-on card, the suggested configuration is as the

following:

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 69 70

Keine Kommentare

MSI MS-6382 Spezifikationen Seite 50