MSI MS-9105 Bedienerhandbuch PDF herunterladen (Seite 53)

AWARD

BIOS Setup

3-11

device if the system fails to boot from the 1st/2nd/3rd boot device.

Swap Floppy Drive

Setting to Enabled will swap floppy drives A: and B:.

Boot Up NumLock Status

This item is to set the Num Lock status when the system is powered on.

Setting to On will turn on the Num Lock key when the system is powered on.

Setting to Off will allow end users to use the arrow keys on the numeric

keypad. Settings: On and Off.

Gate A20 Option

This item is to set the Gate A20 status. A20 refers to the first 64KB of

extended memory. When Fast is selected, the Gate A20 is controlled by

Port92 or chipset specific method resulting in faster system performance.

When Normal is selected, A20 is controlled by a keyboard controller or

chipset hardware.

Security Option

This specifies the type of BIOS password protection that is implemented.

Settings are described below:

MPS Version Control For OS

This field allows you to select which MPS (Multi-Processor Specification)

version to be used for the operating system. The MPS is a specification by

which PC manufacturers design Intel architecture systems with two or more

processors. Most newer server operating systems support MPS 1.4, such as

Noverll IntranetWare 4.1 or Microsoft Windows Server NT 4.0. To find out

which version to use, consult the vendor of your operating system.

Settings: 1.4 and 1.1.

Option Description

Setup The password prompt appears only when end users try to

run Setup.

System A password prompt appears every time when the com-

puter is powered on or when end users try to run Setup.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 81 82

Keine Kommentare

MSI MS-9105 Bedienerhandbuch Seite 53